Stairs

Straight and spiral stair flights / landings (mold surface finish)

Straight and spiral stair flights with terrazzo surface, hammered finish or exposed aggregate surface

The steps may be straight, conical or L-shaped. The staircase is assembled on site by placing the steps on top of each other and aligning them. A temporary support is installed under the free end and removed after reinforcing and concreting the central column. The steps can also be installed on a metal frame of a spiral staircase.

Straight and spiral stair flights with raised edges (skurkant)

Straight and spiral stair flights with central beam

The steps are fixed with bolts inserted into holes in the central beam filled with non-shrink grout. Minimum step thickness is 60 mm. Steps can be mounted on the beam before or after assembling the whole flight.

Straight stair flights with two side beams

Stairs with metal frame

Steps are mechanically fixed. A 3–5 mm neoprene layer must be placed between the elements and the metal base. Minimum step thickness is 60 mm.

Special-shaped stair flights

For existing base structures, we produce step coverings.

Spiral stairs with central column